Walk-In Showers
Modern walk-in showers, built right. Curbless and spa designs welcomed.
Scope-built quotes. Most projects done in 7-14 working days.
Walk-In Showers across Greater Sacramento
Walk-in shower specialists for the whole Sacramento metro.
Tub-to-shower conversions and walk-in shower remodels are the single most-requested bathroom project across the Sacramento region, and it's the work we do more than any other. The reasons are consistent metro-wide: the valley's aging 1960s–1990s housing stock is full of cramped fiberglass tub-showers, and homeowners in Folsom, Roseville, Rocklin, Granite Bay, Carmichael, and Fair Oaks want a bright, easy-to-clean walk-in that also future-proofs the home. Because a shower is a wet room first and a pretty room second, we build ours around waterproofing that actually lasts, then finish them to match the house.
What separates a shower that lasts twenty years from one that fails at the grout line is entirely behind the tile. We build on fully-bonded waterproofing systems — Schluter Kerdi, Wedi, or Laticrete Hydro Ban — instead of the old felt-and-cement-board method that quietly rots subfloors. In pre-2000 Sacramento homes we open up, we routinely find soft subfloor and undersized or improperly-vented drain stacks; we repair and re-vent to code as part of the scope rather than tiling over problems. Every plumbing change is permitted and inspected through the correct jurisdiction for your address, so the work is documented for resale.
Design-wise, the metro has settled on a clear favorite: a curbless or low-threshold walk-in with large-format porcelain, a linear drain, a niche or two, and a frameless glass panel. That look reads as spa-modern and, critically, is the safest to age into — no tub wall to step over. For households planning to stay put, we build in blocking for future grab bars and set slip-rated floor tile now, so the room is safe without looking clinical. We supply premium tile, fixtures, and frameless glass through our supplier network, built into one itemized estimate.
A conversion that keeps the existing footprint is one of the faster high-impact remodels we do; expanding the footprint, moving plumbing, or redoing the full bathroom takes longer, and you get a written schedule up front. It starts with a Project Manager measuring your space, reviewing tile and fixture preferences, and emailing a scope-built estimate — typically within 48 hours of the visit. Pricing is always by scope after that walk-through, never a phone ballpark.
What is included
Scope of work.
Every project is itemized in your quote. Allowances for tile, fixtures, and hardware are clearly marked. No surprise change orders.
- Demolition and haul-away of existing tub or shower
- Plumbing rough-in and re-route as needed
- Waterproof membrane and pan installation
- Tile (porcelain, ceramic, or natural stone)
- Frameless or semi-frameless glass enclosure
- Modern fixtures: rainfall, handheld, body sprays, thermostatic controls
- LED niche lighting and accent options
- Finish work, sealing, and final inspection
Why us
What makes the difference.
Specialists in walk-in shower conversions - not a generalist who does it occasionally
Same-week in-home walk-throughs with itemized scope review
California-licensed contractors only, fully insured and bonded
Written workmanship warranty on every tile and waterproofing job
Curbless and ADA-accessible options for aging-in-place
How it works
Four steps. No surprises.
- 1
Quote
Free in-home consultation. Itemized written quote within 48 hours.
- 2
Design
Tile, fixtures, finishes selected. Permits pulled. Start date locked.
- 3
Build
Regular progress updates. Clean job site. One project manager start to finish.
- 4
Done
Final walk-through. Written workmanship warranty. We earn the review.
Questions we hear
Real questions, real answers.
How long does a tub-to-shower conversion take in the Sacramento area?+
When the existing footprint and plumbing stay put, most conversions run about 5–9 working days including waterproofing cure time. Moving the drain, going curbless, or enlarging the shower adds time — you get a written day-by-day schedule with your itemized estimate.
Can you build a curbless (zero-threshold) shower in my home?+
Usually yes. A curbless shower needs the floor recessed for slope and a linear drain, which is straightforward on a slab and very doable on a raised foundation with framing adjustments. We confirm what your floor structure allows at the in-home visit.
Do you handle permits for shower remodels?+
Yes. Any time we change plumbing, drains, or the shower valve, we pull the required plumbing permit through your jurisdiction — City of Sacramento, Folsom, Roseville, or Placer / El Dorado / Sacramento County — and schedule inspections as part of the project.
Will a walk-in shower work for aging in place?+
It's one of the best moves you can make. A low- or zero-threshold entry, slip-rated floor tile, a built-in bench, and blocking for grab bars make the shower safe to use for decades without looking like a hospital. Ask about our aging-in-place bathroom checklist.
How much does a walk-in shower cost in Sacramento?+
No two showers are alike. Tile grade, glass thickness, plumbing rework, footprint, and finish tier all change the number — so we don't quote over the phone. Every project is priced after an in-home walk-through by a Project Manager who measures the bathroom, listens to what you actually want, and writes an itemized estimate. That's the only number that's honest.
Can you convert a tub into a walk-in shower?+
Yes. Tub-to-shower conversion is one of the most popular bathroom upgrades in the Sacramento area. We remove the tub, re-route plumbing if needed, install a waterproof pan, tile the walls and floor, and finish with glass and fixtures. Typical timeline is 7-12 working days.
Do I need a permit?+
Most tub-to-shower conversions require a plumbing permit, especially if drains are re-routed. We pull all required permits on your behalf as part of the project.
How long does the install take?+
Most walk-in shower projects take 7 to 14 working days from demo to final cleanup. Larger spa-bathroom remodels run 3 to 6 weeks.
Can you build a curbless / ADA-accessible shower?+
Absolutely. Curbless showers, grab bars, ADA-compliant benches, and slip-resistant tile are all standard options — and especially popular with aging-in-place homeowners in Lincoln, Roseville, and Carmichael.
Do you offer financing?+
Yes. Financing is available on most projects through our contractor partners' lending programs. Terms depend on your credit and the program, and you'll see the options alongside your itemized estimate.
Are you licensed and insured?+
Every project is performed by a California-licensed, bonded and insured contractor of record. The license # appears on your contract before you sign, and you can verify any California contractor at cslb.ca.gov.
What is your warranty?+
Every shower comes with a written workmanship warranty on tile and waterproofing — the length and coverage are spelled out in your contract. Fixtures and glass carry the manufacturer warranty (typically 5-10 years).
Free · No spam · No phone calls
Not ready to book? Plan your walk-in showers first.
Grab our free Sacramento Remodel Planning Kit — including the Scope-Built Quote Worksheet — so you can lock your scope, compare bids apples-to-apples, and dodge the 5 line items that blow most budgets.
- Scope-Built Quote Worksheet — for apples-to-apples bids
- 10 questions every Sacramento contractor should answer
- Sacramento permit reality check by jurisdiction
- The 5 line items that blow most remodel budgets
- Material + finish cheat sheet (what to spec, what to skip)
Ready to start?
Book your free walk-in showers estimate.
Quick intake form. A Project Manager visits your home, measures, and walks you through realistic options and pricing — no pressure, no phone-sales gauntlet.